FD20/ FD25/ FD30/ FD35 Forklift
Introduction and features of Forklift:
1. FD20/ FD25/ FD30/ FD35 forklift is a kind of spade machine used in construction industry both China and abroad. 2. The forklift has function of 2-3.5ton balanced internal combustion.
3. The forklift has beautiful appearance, optimized by computer.
4. This kind of forklift is configured according to international standard, it is safe while operating. The forklift can protect environment against pollution.
5. The forklift is working with high efficiency by combining manual operation and mechanized operation.
6. The forklift is composed of wide cab, adjustable steering-wheel, human construction seat, advanced rubber suspension and shock-absorptive system.
7. The CJ type wide masts provide better visual field and improve working efficiency of the forklift; it is much safe to operate.
8. FD20/ FD25/ FD30/ FD35 forklift is fixed with direct injection diesel engine. It has advantages of high performance with low displacement and big torque with slow rotating speed. This kind of engine is powerful and reliable.
9. The optimized combined operating system makes the operation of forklift much easier.
Specifications of Forklift:

Characteristic (Forklift)	Model	FD20	FD25	FD30	FD35
	Rated capacity	2000kg	2500kg	3000kg	3500kg
	Load center	500 mm
	Power type	Diesel engine
	Control	Sit down rider type
	Gear type	Hydraulic
Performance (Forklift)	Max driving speeds (with load)	According to models
	Gear I (Forward / Reverse)	8.8/9 (Km/h)
	Gear II (Forward / Reverse)	18.5/20 (Km/h)
	Max lifting speeds (with load)	430 mm/s			330mm/s
	Max pull	12.7 KN		13 KN	14.5 KN
	Max grade ability (with load)	20 %
	Max lift height	3000 mm
	Free lift height	160 mm			305 mm
	Mast tilt angle (F/R)	6/12 º
Dimensions (Forklift)	Overall length with forks	3433mm	3653mm	3750mm
	Overall width	1150mm		1225mm
	Mast height	1995mm		2065mm	2180mm
	Overall height, fork raised	4030mm		4272mm	4360mm
	Overhead guard height	2070mm		2100mm	2180mm
	Turing radius	2170mm	2240mm	2460mm
	Fork overhang	480mm		490mm
	Passage width (basic right angle stow)	1970mm	2000mm	2110mm
Chassis (Forklift)	Front tyres	7.00-12-12PR		28×9-15-12PR
	Rear tyres	6.00-9-10PR		6.50-10-10PR
	Thread Front/Rear	960/970 mm		1000/970 mm
	Wheelbase	1600 mm		1700 mm
	Ground clearance at mast	110 mm		140 mm
	Ground clearance at frame	120 mm		150 mm
	Service brake	hydraulic/foot pedal
	Parking brake	mechanical/hand lever
	Self weight	3410kg	3790kg	4360kg	4900kg
Drive (Forklift)	Battery voltage	12 V
	Battery capacity	100 Ah
	Engine type	490BPG/A490BPG
	Rated power	37/2650 (Kw/rpm)
	Max torque	14.8/1800-1900 (Kg.m/rpm)
Standard configuration (Forklift)	Multifunctional instrumental panel
	Standard battery
	Fully hydraulic steering
	Rubber skid with free foot step
	Rain cover
	Instrumental box & document bag
	Standard fork
	3 meters of 2-stage wide-view mast
	Towing pin
Optional Configuration (Forklift)	Isuzu or Nissan diesel engine
	Super solid tire with elasticity
	Longer fork
	Wider fork
	Higher and wider fork
	2-stage or 3-stage height mast

Note: The specifications are subject to change without notice.
FD20/ FD25/ FD30/ FD35 Forklift